| Customization: | Available |
|---|---|
| Application: | Chemical Industry |
| Automation Grade: | Automatic |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1, Thermoforming:
The PVC/PE film into the forming area after preheating mold -- > forming mold blowing mold -- >blow film forming.
triangle knife cutting process and dotted line.
2, Filling:
6 filling heads, forming suppository for one-time embedded type filling, filling accuracy + / - 2%, material barrel has electric heating insulation system, with stirring motor at the top to make the in a uniform state, material barrel pump into the by the high precision of filling head, filling a residual through the other end of the cycle to the raw material filling barrel again next time.
3, Cooling:
into the cooling racks after the whole filled, external cooling box is equipped with water chiller, cooling air through the cooling box of four condenser suppository of cooling rack to cool.
sealing and part code:
4. Sealing and Cutting:
After cooling of the solid suppository into the sealing area: preheating mold -- -- > the sealing mould -- - > code mold. And then to shear a set of finished product for 5 and 6 grain (be) according to customer's requirements.
|
output
|
2400-3600granules/hr
|
|
single dosage
|
0.5-5ml
|
|
dosage allowed
|
<±2%
|
|
Suppository application form
|
Bullet-head form, duck-mouth form and other special forms
|
|
used to the host
|
Synthesis of glycerin fatty acids, glycerin gelatin, polyethylene glycol etc.
|
|
store the capacity of the liquid barrel
|
20L
|
|
working atmospheric pressure
|
0.6Mpa
|
|
consumption gas/minute
|
0.6m3
|
|
used water quantity
|
15kg /hr(cycle using)
|
|
the voltage of the power
|
The three phase AC 380V
|
|
total power
|
2.5KW
|
|
external dimension
|
3200mm×1530mm×1600mm
|
|
total weight
|
300kg
|
|
Packing material
|
PVC, PVC/PE film, thickness 0.15mm
|
){kind=link}