Product Description
In our three phase decanter centrifuges, the light and heavy liquids are discharged via the force of
gravity and the centrifugal force, which effectively prevents the phases mixture and incomplete separation. Ordinary three phase decanter centrifuges often generate incomplete separation because of unstable light / heavy phase liquid compositions, while in our centrifuges, the interface of light / heavyphase liquids can be regulated with constantly changing material compositionsin the machine working, thus optimal separation effect is achieved. Currently, decanter centrifuges are used in the separation of oils, water and slags / dregs in the coal tar industry, the petrochemical industry, the fish powder industry, the swill oil industry, the electrolytic copper industry, and the waste scraps in the slaughter houses.
Material: high quality stainless steel
Main feature:
- Two motor, two frequency inverter drive system, realize differential speed stepless regulation and energy return.
- Spiral stoker blades: Surfacing welding tungsten carbide grinding.
- Drum cone cylinder material outlet: Replaceable wear resistant, corrosion resistant ceramic alloy bushing.
- Main bearing: ABB
- Main sealing parts: Taiwan SOG, material is Nitrile butadiene rubber
- Electrical protection: overload, phase loss, torque protection
- Main and vice inverter use common DC bus, vice motor's function is generating electricity ( save electricity)
- PLC remote control.
Working Principle:
Two Phases Separation Principle:
The feed suspension is introduced through an inlet pipe into the feed zone of the conveyor where it is accelerated and directed into the interior of the bowl. The settled solids are conveyed axially towards the small end of the bowl by means of the screw conveyor, which rotates at a slightly different speed than the bowl. On the way to the discharge ports the solids are lifted out of the pond up along the dry beach. The solids are finally discharged from the bowl through the discharge ports into the collecting chamber of the casing that surrounds the bowl. From there the solids are removed by gravity through the outlet funnel. The liquid phase forming a hollow cylinder due to the centrifugal force, and flows towards the large end of the bowl. There the liquid overflows adjustable plate dams into the centrate chamber of the casing and is discharged by gravity.
Three Phases Separation Principle:
The light liquid phase is discharged into the casing through radial holes in the large end hub. The heavy liquid phase is discharged through axial holes in the large end hub. The liquid radius for the light liquid phase is smaller than the radius for the heavy liquid phase. The liquid level is controlled by plate dams. In order to prevent the light liquid phase from leaving the bowl through the heavy liquid phase outlet, a separating plate is placed on the inside of the large end hub. The heavy liquid phase has to pass under the separating plate before being discharged into the casing. The liquid radius for the heavy liquid phase is controlled by plate dams. The solids are discharged in the normal way.
Technical Parameters:
Bowl ID
(mm) |
Bowl Speed
(rpm) |
L / D |
G - Force |
Capacity
(m3/h) |
Solids Removal
(m3/h) |
Primary Motor
(Kw) |
Weight
(Kg) |
Dimension
(mm) |
|
| 250 |
4500~4600 |
3.0~5.0 |
2000~3500 |
3~5 |
0.4 |
11 |
760 |
1600×1100×850 |
| 300 |
4000~4600 |
3.0~5.0 |
2000~3500 |
3~15 |
0.8 |
11~15 |
1500 |
2470×1230×850 |
| 360 |
3200~4200 |
3.0~5.0 |
2000~3500 |
5~20 |
1.2 |
5~22 |
2000 |
2790×1300×880 |
| 400 |
3200~3900 |
3.0~4.8 |
2000~3500 |
5~30 |
2 |
18.5~30 |
2600 |
2950×1400×850 |
| 450 |
3000~3700 |
3.0~5.0 |
2000~3500 |
5~45 |
2.5 |
22~37 |
3200 |
3300×1500×920 |
| 500 |
2700~3450 |
3.0~5.0 |
2000~3500 |
10~80 |
5 |
30~55 |
5200 |
3730×1600×1100 |
| 550 |
2600~3300 |
3.0~5.0 |
2000~3500 |
10~90 |
6 |
45~75 |
6900 |
4000×1400×1600 |
| 600 |
2500~3200 |
3.0~5.0 |
2000~3500 |
20~95 |
7 |
37~90 |
7900 |
4200×1800×1350 |
| 650 |
2400~3100 |
3.0~5.0 |
2000~3500 |
20~105 |
8 |
37~90 |
8200 |
4300×1900×1350 |
| 750 |
2200~2900 |
3.0~5.0 |
2000~3500 |
30~120 |
12 |
55~135 |
12000 |
5000×2500×1500 |
| 900 |
1800~2600 |
3.0~5.0 |
2000~3500 |
40~180 |
16 |
75~160 |
18000 |
6500×2700×1500 |
FAQ
Q1: Are you a manufacturer or a trader?
A: As a professional manufacturer, we have our own factory, and if a customer has reasonable demand, out machine can be customized.
Q2: How do you ensure the machine quality?
A: As a professional manufacturer of pharmaceutical devices for more than 15years, with strict management, advanced
processing technologies and professional workers, we are confident for our machines quality. And before any machine is delivered,will be carefully tested.
Q3: How can I trust you for the first cooperation?
A: Since our company was founded, we have registered in China Industry and Commerce Bureau. We passed the SGS &
ISO certification.
Q4: How do I place an order, and how is it completed?
A: Under the condition that the buyer is satisfied with the quotation and pre-sales service:
1. Both of parties sign on a contract, and then the seller prepare the PI.
2. The buyer arranges the down payment.
3. The seller prepares the machines.
4. After the machine is completed, have the test & trial run.
5. Before the delivery, if the buyer requires, have the necessary inspecting.
6. As per the contract/ PI amount, the buyer balances the payment.
7. The machine is going to be shipped.
8. After the machine is received, the seller provide the buyer guidance for the installation and the debugging.
Audited Supplier 
){kind=link}