Introduction:
1. Automatic suppository production line is suitablefor the production of special shapes of slugs such as bulletshape, torpedo shape and duckbill shape, which can meet the production of suppositories of various shapes. (Make a mold according to the sampleor requirement.)
2. From the beginning of the automatic suppository shell molding, to the filling station of the liquid raw material, the recip-rocating cooling setting (liquid conversion solid state), the continuous sealing, the batch number, the finished product cutting (the number of cutting particles is arbitrarily set on the touch screen,1-10 Free cutting)
Main application:
The full-automatic suppositories production unit is a use of PLC do the whole control and use of pneumatic mode for the automatic production line source of power. This equipment combining foreign advanced technology and domestic actual situation, the design is novel, the operation is simple, is a highly efficient and stable production unit of automatic suppositories. Its leading position in domestic technical content. In the process of development, we need to consider the user everywhere, adjustable and accuracy can confirm the work, with different parameters, the equipment can mold production of different shapes and specifications of the suppositories can sue different packing material(PVC, PE, PVC/AL/PE Compound film), eliminating unqualified products etc.
Working Principle
The rolled plastic sheet material(PVC or PVC/PE) is pressed positively to blow and make a statue to take shap,and enter into filling procedure automatically,stirred equally drug fluid to nul nutshell automatically through high precise dosing pump,and is sheard into multi-stripiso -segment.Then it will become solid cork granulation through much time cryo-stereotypia which will realize conversation from fluid to solid.At last,it will be produced to end product suppository by mending form,sealing,beating batch number and shearing working procedure.
Technical Parameters:
| Commodity |
Automatic suppository production line |
Model |
SJ-3LS |
| Output |
4,000-5,000 pcs/h |
single dosage |
0.5-5g |
| Dosage allowed |
<±2% |
Packaging Film |
PVC\PE (thickness0.15-0.18mm)
diameter:270mm |
| Stirring tank capacity |
30L |
Air pressure |
≥0.6Mpa |
| Air consumption/min |
1.5m3 |
Water consumption/h |
50kg (recycling) |
| Working voltage |
3 phase 380V |
total power |
5KW |
| Adopt forming shapes |
Bullet, torpedo and duck shapes and other shapes |
Machine Weight |
1000KG |
| Adapt Material |
Synthetic fatty acid glycerol, glycerin gelatin, polyethylene glycol etc |
Each distance of suppository |
17.4mm |
| Overall dimensions |
L3,587mm×W1,388mm×H1,828mm |
Feature
suppository filling automatic production line has a stable and efficient preheating mold, heated mold, molding, belting, canned, frozen, sealing bolt all production processes such as complete system process, grain production capacity of 18,000-23,000 / hour.
Processes:
It will be rolled up (PVC, PVC/PE) into the forming area by the preheated mold, the heating die, the mold, the blow molding and the bubble forming. The triangle-knife cutting edge (cutting edge) and the dotted line.
Filling:
One-time molding suppository for embedded type filling, filling accuracy + / - 2%, filling material barrel has electric heating insulation system, the top is equipped with a uniform mixing machine in order to make drugs, drug by high precision in VAT filling pump into the filling head, a drug through the other end of the cycle to rest after filling material barrel filling again next time.
Cooling:
The whole irrigation and drainage install suppository into cooling box, external cooling box is equipped with water chiller, cooling air through the condenser cooling box for cooling cooling box suppository.
Sealing and shearing
Be cooled solid suppository into the sealing area: preheating mold (hot) and the sealing mould (sealing) - code mould (lot number) - hob (clip above) - > count shear.
Electric-control parts configuration list:
| Number |
Commodity |
Notice |
| 1 |
Programmable controller |
Siemens |
| 2 |
The man-machine interface |
WEINVIEW |
| 3 |
Temperature controller |
Yudian(China) |
| 4 |
Electromagnetic valve gas source treatment |
Airtac(Taiwan.China) |
| 5 |
Photoelectric switch |
Panasonic(Japan) |
| 6 |
proximity switch |
Suodilong(China) |
| 7 |
Stepper motor |
LeiSai(China) |
| 8 |
Mixing motor/Cooling box motor |
JSCC/(China) |
Detail images:
3-years warranty period for whole machine except of tubes and human factors etc, and 12-month of after-sale service from the date when you receive machine or 12 months when installation finished; Consultant services for whole machine life, and 24 hours technical support by email; UPS, English software, user manual and the installation & debugging by our experienced technicians.
1. Can your machine meet our need well?
We will supply you a proposal as to your specific requirement, and each machine is customized to satisfy customer's need well.
2. Are you a factory or a trading company?
We are the manufacturer, and have been in industry for more than ten years.
3. What's your payment way?
T/T by our bank account directly, , or by the West Union, or in cash.
4. How can you ensure the machine's quality after we put the order?
Before the delivery, we will send you machine's pictures and videos, or you can come to us to have the quality checking by
yourself, or by the third party inspection organization contacted by your side.
5. We are afraid you won't deliver us the machine after we pay you the money.
Please note our above business license and certificates. And if you don't trust us, you can use Made in China serviceor by LC.
6. Why choose your company?
We have been engaged in the manufacturing of various packing machines professionally over 10 years, and we can provide better after-sales service.
Audited Supplier 
){kind=link}